Compare

Arctos vs AR4: 6-Axis DIY Robot Arm Comparison

The Arctos robot arm and the AR4 are both six axis arms you build yourself. Arctos is a mostly 3D printed design with kits that start at a low price. The AR4 is built on 26 machined aluminum structural parts with encoder feedback on every joint. On paper their reach and payload are close, so the real choice is structure, electronics and support.

Annin Robotics AR4-MK5 six-axis aluminum robot arm
Annin AR4-MK5 Image: Annin Robotics

Arctos robotic arm

by Arctos Robotics. See the maker's page in Sources for photos.

$0

AR4 combo kit with motors

$0

Arctos kits start at (per Arctos)

0 mm

AR4 reach (Arctos: 600 mm)

0.0 kg

AR4 payload (Arctos: 2 kg)

Overview

AR4 or Arctos: how they compare

People searching for an Arctos robot arm usually also find the AR4, because both are six axis arms you assemble at home, both are open source, and both reach about 600 mm. Arctos describes its arm as mostly 3D printed. The AR4 is a machined aluminum arm with printed covers.

Arctos says on its own FAQ that the precision of a printed arm is limited more by the rigidity of the plastic parts than by the motors. That is the core of this comparison. The tables below use the specifications published on the Arctos site and the AR4 spec sheet.

Specs

AR4 vs Arctos specs table

The AR4 wins 3 rows and the Arctos wins 3. AR4 values are from the AR4-MK5 specification sheet. Arctos values are from Arctos Robotics's own pages, listed under Sources. "Not published" means the maker does not list it.

Annin AR4-MK5 and Arctos robotic arm specifications side by side
SpecAnnin AR4-MK5Arctos robotic arm
AxesEven66
ReachAR429 mm more reach629 mm (24.75 in)600 mm max
PayloadArctosSlightly higher published payload1.9 kg (4.15 lb)2 kg
Repeatability0.25 mmNot published
Arm weightArctos12.25 kg (27 lb)10 kg
StructureAR4Machined aluminum structure26 machined aluminum structural parts, 3D printed PETG coversMostly 3D printed plastic parts
ElectronicsTeensy 4.1 plus Arduino Nano or Mega for I/O, closed loop steppers with encodersArduino / ESP32 / CAN bus. Open loop or closed loop options.
SoftwareEvenPython HMI with digital twin, ROS 2, Modbus, G-codeArctos Studio, ROS and ROS 2, GRBL, RoboDK, Isaac Sim, Matlab
Open sourceEvenMechanical design, electronics, firmware, and software are all openOpen source code and CAD files (Fusion 360, STL, 3MF, STEP)
PriceArctosLower entry priceCombo kit $1,229 plus $699 motor package ($1,928 total)Kits starting at $231 (per the Arctos site)
PrintingAR4Covers and spacers only. Print them or buy a printed set.Printed parts need a 200 x 200 mm printer, or buy the printed kit

AR4 advantages

Where the AR4 is stronger

AR4 advantage

Aluminum structure

26 machined aluminum structural parts instead of printed plastic.

AR4 advantage

Published repeatability

0.25 mm on the AR4 spec sheet. Arctos does not publish a figure.

AR4 advantage

Encoders on every joint

Closed loop steppers with encoder feedback come standard in the AR4 motor package.

AR4 advantage

Industrial I/O

A $16 Modbus RS-485 upgrade and up to three extra axes, covered in the build manual.

Arctos advantages

Where the Arctos is stronger

Arctos advantage

Entry price

Kits start at $231, per the Arctos site, vs $1,928 for a complete AR4.

Arctos advantage

Lighter

10 kg published weight vs 12.25 kg for the AR4.

Arctos advantage

Payload on paper

2 kg published vs 1.9 kg for the AR4.

Price

AR4 vs Arctos price

Arctos sells its arm as separate kits: a hardware kit with the non printed parts, a 3D printed parts kit, and the CAD files. Its site says kits start at $231. That is a lower entry price than the AR4, and we say so plainly. Check the Arctos bill of materials for the cost of a complete arm with the options you want.

A complete AR4-MK5 is $1,928: the $1,229 combo kit plus the $699 StepperOnline motor package. That buys machined aluminum structural parts, closed loop stepper motors with encoders, drivers, and the electronics, matched to one build manual.

See the AR4 MK5 combo kit or browse all AR4 robot kits, including the aluminum, hardware, and electrical kits sold separately.

Prices change. Check each store before you buy.

List prices on anninrobotics.com and the maker's official store, October 2026

Software

Software and openness

Arctos lists Arctos Studio, its own simulation and control software, plus ROS and ROS 2, GRBL firmware, RoboDK, Isaac Sim and Matlab.

The AR4 ships with a free Python HMI that includes a digital twin, open source ROS 2 drivers with MoveIt and Gazebo, Modbus for PLCs, and G-code. Its Teensy firmware is an open Arduino sketch you can read and change.

Build and repair

Build quality and repair: AR4 vs Arctos

The AR4 structure is 26 machined aluminum parts with bearings, belts and pulleys from the kit. The build manual walks through every joint, the wiring and the startup procedure, and every part is sold separately if one wears out.

Arctos uses printed structural parts and gearboxes. You can print them yourself on a 200 x 200 mm printer or buy the printed kit. That keeps cost down and is a good way to learn how gearboxes work, at the cost of the stiffness you get from metal parts.

Read the full AR4-MK5 specifications for motors, gear ratios, and joint ranges.

Bottom line

Who should choose which

Choose the AR4 if

  • You want a metal arm that stays stiff under load.
  • You want a published repeatability figure and encoders on every joint.
  • You plan to connect the arm to PLCs, a seventh axis or a machine.

Choose the Arctos if

  • Budget is the main limit and you own a 3D printer.
  • You want to learn by printing the gearboxes yourself.
  • A lighter, mostly plastic arm suits your bench.

FAQ

AR4 vs Arctos FAQ

What is the difference between the Arctos and the AR4?

Both are six axis arms you build. Arctos is mostly 3D printed and lists 600 mm reach and 2 kg payload. The AR4 is built on machined aluminum, with 629 mm reach, 1.9 kg payload and 0.25 mm repeatability.

Is the Arctos robot arm cheaper than the AR4?

Yes, to start. The Arctos site says its kits start at $231. A complete AR4-MK5 with motors is $1,928.

Which has more payload, the Arctos or the AR4?

Arctos publishes 2 kg. The AR4 is rated for 1.9 kg. The figures are close.

Does Arctos publish repeatability?

Not on its site as of October 30, 2026. The AR4 is rated for 0.25 mm.

Do the Arctos and AR4 both work with ROS 2?

Yes. Arctos lists ROS and ROS 2. The AR4 has open source ROS 2 drivers with MoveIt and Gazebo.

Build your own AR4.

Machined aluminum, open source from the ground up, at a price a classroom can afford.

References

Sources

Arctos figures retrieved from arctosrobotics.com on October 30, 2026. Arctos is a trademark of its owner. This page is not affiliated with or endorsed by Arctos Robotics.