Compare

AR4 vs Niryo Ned2: an honest 6-axis robot arm comparison

Both are 6-axis arms built around aluminum, and both are used in classrooms. The AR4 is an open source kit with more reach, about six times the payload, and tighter published repeatability, for well under half the US price. The Ned2 is a finished, compact desktop robot with a polished education ecosystem. Here is who wins each category, using each maker's published numbers.

Scored across 12 categories

Scoreboard: AR4 wins 7 of 12 categories, Ned2 wins 5 of 12 categories

Annin Robotics AR4-MK5 6-axis robot arm
Image: Annin Robotics

AR4-MK5 wins 7 of 12 categories

Niryo Ned2 6-axis desktop robot arm
Image: Niryo

Ned2 wins 5 of 12 categories

Annin Robotics AR4 6-axis robot arm with white covers and a gripper
Annin AR4-MK5Image: Annin Robotics
  • 6 axes
  • 629 mm reach
  • 1.9 kg payload
  • 0.25 mm repeatability
  • $1,229
Niryo Ned2 blue 6-axis desktop robot arm with a gripper
Niryo Ned2Image: Niryo
  • 6 axes
  • 490 mm reach
  • 0.3 kg payload
  • ±0.5 mm repeatability
  • €3,990 list

$0

AR4-MK5 combo kit, starting price

$0

Ned2 at RS Americas (€3,990 from Niryo before tax)

0 mm

AR4 reach (Ned2: 490 mm)

0.0 kg

AR4 payload (Ned2: 0.3 kg)

Scoreboard

Category by category

The AR4 leads on price, payload, reach, repeatability, openness, and repair. The Ned2 leads on convenience, size, power draw, warranty, and classroom material.

  1. Category 1

    Price

    Fully equipped from $2,188 in list prices vs €3,990 (about $5,714 at RS Americas)

    AR4 WINS

  2. Category 2

    Payload

    1.9 kg vs 0.3 kg, about 6 times the rated load

    AR4 WINS

  3. Category 3

    Reach

    629 mm vs 490 mm

    AR4 WINS

  4. Category 4

    Repeatability

    0.25 mm vs ±0.5 mm published

    AR4 WINS

  5. Category 5

    Open hardware

    Mechanics, electronics, firmware, and software are all open

    AR4 WINS

  6. Category 6

    Repairability and spares

    Every part sold or sourced individually. Niryo publishes no parts list

    AR4 WINS

  7. Category 7

    DIY and kits

    Buy the combo or just the aluminum, hardware, or electrical kit

    AR4 WINS

  8. Category 8

    Ready to use

    Ships assembled and calibrated, with NiryoStudio

    NED2 WINS

  9. Category 9

    Classroom curriculum

    Block programming and education packs from Niryo

    NED2 WINS

  10. Category 10

    Size and weight

    7 kg and a 182 x 188 mm footprint vs 12.25 kg

    NED2 WINS

  11. Category 11

    Power draw

    30 W max vs 198 W max

    NED2 WINS

  12. Category 12

    Warranty

    1 year, extendable to 36 months. AR4 warranty not published

    NED2 WINS

At a glance

Strengths and price

Strengths radar, AR4 vs Ned2Reach: AR4 100, Ned2 78. Payload: AR4 100, Ned2 16. Repeatability: AR4 100, Ned2 50. Affordability: AR4 100, Ned2 39. Low power draw: AR4 15, Ned2 100. Light weight: AR4 57, Ned2 100ReachPayloadRepeatabilityAffordabilityLow power drawLight weight
AR4-MK5 Ned2Published specs only. Each axis scales the better arm to 100. Affordability uses a fully equipped AR4 ($2,248) vs the Ned2 US distributor price.
List price, one arm (USD)
  • AR4 combo kit$1,229
  • AR4 fully equipped (kit, motors, printed parts)$2,248
  • Ned2 at RS Americas (Niryo list is €3,990 before tax)$5,714

A fully equipped AR4 costs less than 40 percent of the Ned2 US price, and lifts about six times as much.

Based on list prices on anninrobotics.com and RS Americas

Specs

Side by side specs

Every row has a winner badge where there is a clear one. Filter by category, or turn on the highlight. AR4 values are from the AR4-MK5 specification sheet. Ned2 values are from the Niryo technical specifications PDF and user manual. "Not published" means the maker does not list it.

AR4-MK5 and Niryo Ned2 specifications side by side
SpecAnnin AR4-MK5Niryo Ned2
AxesEven66
ReachAR4629 mm (24.75 in) (winner)490 mm
PayloadAR41.9 kg (4.15 lb) (winner)300 g
RepeatabilityAR40.25 mm (winner)±0.5 mm (ISO 9283)
Max speedMax linear speed: 100 mm/s45, 30, 45, 90, 90, 90 °/s (joints 1 to 6)
Arm weightNed212.25 kg (27 lb)7 kg (winner)
MaterialsEven26 machined aluminum structural parts, 3D printed PETG coversAluminum, ABS plastic, and steel. Injection molded ABS-PC covers.
DrivesClosed loop stepper motors with gearboxes and an HTD belt stage, DM332T and DM320T drivers3 stepper motors (joints 1 to 3) and 3 Dynamixel smart servos (joints 4 to 6)
BrakesNot publishedNone. The manual states the arm does not need a holding brake.
IP ratingNot publishedNot published
ControllerTeensy 4.1 for kinematics, Arduino Nano or Mega for I/ORaspberry Pi in the base, with WiFi, Bluetooth 5.0, Gigabit Ethernet, and USB
PowerNed2198 W max, 8.25 A at 24 VDC30 W max, 20 W average, 100 to 240 VAC input (winner)
SoftwareEvenPython HMI with digital twin, ROS 2, Modbus, G-codeNiryoStudio (block programming), Python API, ROS, Modbus TCP
Open sourceAR4Mechanical design, electronics, and software (winner)ROS stack on GitHub. The arm hardware is not open.
PriceAR4Combo kit from $1,229. Motor package $699. Printed parts set $319.99. (winner)€3,990 from Niryo before duties and taxes. $5,714.28 at RS Americas.
DIY and kit optionsAR4Combo, aluminum ($699), hardware ($319), and electrical ($229) kits, or source parts yourself (winner)Sold assembled only
WarrantyNed2Not published1 year, extendable to 36 months (winner)

AR4 advantage

Reach and payload, to scale

AR4 WINS629 mm and 1.9 kg vs 490 mm and 0.3 kg

The AR4 reaches 139 mm farther and is rated for 1.9 kg against 300 g. The Ned2 is lighter at 7 kg.

AR4 629 mmNed2 490 mm
Published reach, drawn to the same scale. Real work envelopes depend on joint limits.
AR4-MK5 payload1.9 kg
Ned2 payload0.3 kg
AR4-MK5 arm weight12.25 kg
Ned2 weight7 kg

AR4 advantages

Where the AR4 is stronger

AR4 advantage

Payload for real tools

1.9 kg rated, enough for larger grippers, cameras, and tooling. The Ned2 is rated for 300 g.

AR4 advantage

Reach and repeatability

629 mm reach and 0.25 mm published repeatability, vs 490 mm and ±0.5 mm.

AR4 advantage

Cost

Combo kit, motor package, and printed parts come to $2,227.98. The Ned2 is $5,714.28 at RS Americas.

AR4 advantage

Fully open source

Mechanical design, electronics, firmware, and HMI software are open. Niryo opens its ROS stack, not the robot hardware.

AR4 advantage

Kits your way

Buy the full combo, or the aluminum, hardware, and electrical kits separately.

AR4 advantage

Repairable and upgradeable

Standard parts, a full build manual, and upgrades like the Hall effect sensor kit and HTD belts.

AR4 MK5 machined aluminum parts kit laid out
Aluminum kitImage: Annin Robotics
AR4 MK5 hardware kit with belts, bearings, pulleys, and fasteners
Hardware kitImage: Annin Robotics
AR4 electrical kit with wiring, connectors, and controller boards
Electrical kitImage: Annin Robotics
StepperOnline stepper motors, drivers, and power supply package for the AR4
Motor packageImage: Annin Robotics

Ned2 advantages

Where the Ned2 is stronger

Niryo Ned2 robot arm next to a rack of test tubes
Image: Niryo
Ned2 advantage

Ready to use

Ships assembled, with the controller built into the base.

Ned2 advantage

Classroom ecosystem

NiryoStudio block programming, plus education packs and course material from Niryo.

Ned2 advantage

Compact and light

7 kg on a 181.6 x 187.5 mm footprint.

Ned2 advantage

Low power

30 W max and 20 W average, from a standard 100 to 240 VAC outlet.

Ned2 advantage

Built in connectivity

WiFi, Bluetooth 5.0, Gigabit Ethernet, Modbus TCP, and USB.

Ned2 advantage

Warranty

1 year, extendable to a maximum of 36 months.

Edge: AR4 for metal and spares

Durability and build materials

AR4 WINSMetal structure plus individually sold spares

Both arms are aluminum at the core. The AR4 is built from 26 machined aluminum structural parts with 3D printed PETG covers. Niryo lists the Ned2 as aluminum, ABS plastic, and steel, with injection molded ABS-PC covers over aluminum joints. Neither maker publishes a rated lifetime or IP rating.

AR4 MK5 machined aluminum structural parts laid out
Image: Annin Robotics

AR4-MK5

Materials used. Neither maker publishes weight shares by material.

  • Machined aluminum. 26 structural parts: base, links, motor mounts, wrist housing
  • 3D printed PETG. Covers and spacers. STL files are free to print yourself
  • Bearings, shafts, belts, pins. Supplied in the hardware kit. Shaft material is not published
Structure
Aluminum structure, 12.25 kg (27 lb)
Bearings
Included in the hardware kit, with J1 main bearings
Gearing
Gearmotors on the joints plus an HTD belt stage on J3. MK5 moved to higher precision gearboxes
Feedback
Closed loop encoders on every joint
Brakes
Not published
IP rating
Not published
Rated lifetime
Not published
Spare parts
Every part sold or sourced individually. Motors and drivers are StepperOnline catalog items
Niryo Ned2 joint with aluminum tube and stepper motor housing
Image: Niryo

Niryo Ned2

Materials used. Neither maker publishes weight shares by material.

  • Aluminum. Six aluminum joints and chassis
  • Injection molded ABS-PC. Plastic covers over each joint and the base
  • Steel. Listed by Niryo. Which parts are steel is not published
Structure
Aluminum, ABS plastic, and steel, 7 kg
Bearings
Not published
Gearing
Not published. Joints 1 to 3 are stepper driven, joints 4 to 6 use Dynamixel XL430 and XL330 servos
Feedback
Not published for the steppers. Dynamixel servos report position
Brakes
None. The manual says its weight and design do not require one
IP rating
Not published
Rated lifetime
Not published. The manual warns that cutting power during motion can shorten its life
Spare parts
No public parts list. Warranty repairs may replace parts
Durability factors, AR4-MK5 vs Niryo Ned2
FactorAR4-MK5Ned2Edge
StructureMachined aluminumAluminum with ABS-PC covers, some steelEven
CoversPETG, printable at homeInjection molded ABS-PCNed2
Spare partsEvery part sold or sourced individuallyNo public parts listAR4
Self repairFull build manual and open CADThrough Niryo supportAR4
WarrantyNot published1 year, up to 36 monthsNed2
BrakesNot publishedNoneNo data
IP ratingNot publishedNot publishedNo data
Rated lifetimeNot publishedNot publishedNo data

Edge: AR4 for load, Ned2 for size

Mechanics and drives

SPLIT DECISIONAR4 for load, Ned2 for size

StepperOnline stepper motors, drivers, and power supply for the AR4
Image: Annin Robotics

AR4-MK5

12.25 kg (27 lb)
  • Closed loop stepper motors on all six joints.
  • Gearmotors with an HTD belt stage on J3. MK5 moved to higher precision gearboxes.
  • 26 machined aluminum structural parts, bearings, belts, and pulleys.
Niryo Ned2 arm showing its six joints and aluminum links
Image: Niryo

Niryo Ned2

7 kg
  • Three stepper motors on joints 1 to 3, per Niryo's product overview video.
  • Dynamixel XL430 and XL330 smart servos on joints 4 to 6.
  • Joint ranges: 335°, 125°, 160°, 235°, 220°, 290°. Gear type is not published.

Edge: depends on your goal

Electronics and controller

SPLIT DECISIONDepends on your goal

AR4 electrical kit with wiring and controller boards
Image: Annin Robotics

AR4-MK5

198 W max
  • Teensy 4.1 at 600 MHz runs the kinematics.
  • Arduino Nano or Mega for 5 V grippers and solenoids.
  • DM332T and DM320T stepper drivers, Hall effect and microswitch homing.
  • 8.25 A at 24 VDC. Modbus upgrade for PLC links.
Niryo Ned2 back panel with I/O, USB, and Ethernet ports
Image: Niryo

Niryo Ned2

30 W max
  • Raspberry Pi built into the base.
  • WiFi, Bluetooth 5.0, Gigabit Ethernet, 2 USB 2.0 and 2 USB 3.0 ports.
  • Digital and analog I/O on the back panel, Modbus TCP.
  • 100 to 240 VAC input, 5 to 45°C operating range.

Edge: AR4 for openness, Ned2 for beginners

Software and programming

SPLIT DECISIONAR4 for openness, Ned2 for beginners

AR4 robot arm next to its Python HMI control software
Image: Annin Robotics

AR4-MK5

Free and open
  • Python HMI with native Linux support from version 6.3.
  • Jog in joint or Cartesian space, teach positions, run programs.
  • Offline 3D digital twin, ROS 2 with MoveIt 2, Modbus, G-code.
  • Change the firmware and HMI, not just call an API.

Niryo Ned2

NiryoStudio
  • NiryoStudio with block based programming for beginners.
  • Python API and a ROS stack published on GitHub.
  • Modbus TCP for PLC links.

Edge: AR4

Accuracy

AR4 WINS0.25 mm vs ±0.5 mm published repeatability

0.25 mm

AR4-MK5 published repeatability AR4

±0.5 mm

Ned2 published repeatability (ISO 9283)

Repeatability is how closely an arm returns to a taught point, not absolute accuracy, and neither maker publishes an absolute accuracy figure. These are maker figures, not tests we ran. AR4 results also depend on how carefully the kit is assembled and calibrated.

Edge: AR4

Maintenance and repairability

AR4 WINSStandard parts and a full build manual

AR4 hardware kit with belts, bearings, and pulleys
Image: Annin Robotics

AR4-MK5

You built it, you can fix it
  • Motors, drivers, belts, bearings, and sensors are standard parts.
  • Annin sells individual upgrades like the Hall effect sensor kit and HTD belt updates.
  • The build manual covers every joint.

Niryo Ned2

Warranty service
  • 1 year warranty, extendable to 36 months.
  • Niryo's warranty terms say repairs may include replacing one or more parts.
  • A public spare parts list and parts prices are not published.

Edge: AR4

Total cost of ownership

AR4 WINSFully equipped for well under half the US price

Set the number of arms and what you buy. Only list prices from anninrobotics.com and RS Americas are used.

AR4 build
Ned2 price

RS Americas lists the Ned2 at $5,714. Niryo lists it at €3,990 before duties and taxes.

AR4-MK5$2,248

$2,248 per arm

Ned2$5,714

$5,714 per arm

The AR4 setup saves $3,466 across 1 arm, about 2.5 AR4s for every Ned2.

List prices only. Shipping, tax, tools, grippers, and your build time are not included. Spare parts and repair costs are not published by Niryo, so they are left out instead of guessed. The Ned2 price is the full assembled arm with its controller built into the base. Niryo sells the gripper and other tools separately.

Use cases

Education and use cases

Students gathered around an AR4 robot arm they built in class
AR4 in classImage: Annin Robotics
AR4 robot arm tending a CNC mill for pick and place
AR4 automationImage: Annin Robotics
Students working with a Niryo Ned2 robot arm
Ned2 in classImage: Niryo

Our pick: Depends

AR4 for education

Students build the arm, wire it, flash the Teensy, and then program it. Every part is documented and replaceable, so a broken link becomes a lesson. A lab can field about two fully equipped AR4s for the US price of one Ned2.

Ned2 for education

The Ned2 is built for classrooms that only need to program a finished arm, with block programming in NiryoStudio and course material from Niryo.

Edge: depends

Support and community

SPLIT DECISIONCommunity driven vs vendor support

AR4-MK5

Community driven
  • Support tickets on anninrobotics.com.
  • Free build manual and step by step video tutorials.
  • Forums, user build showcases, and a Build of the Year award.

Niryo Ned2

Vendor support
  • Niryo support and documentation.
  • Education packs and course material.
  • Made in France near Lille, per Niryo.

Videos

Watch them work

AR4

AR4 MK5 Offline Robot Programming | Python ROS2 Simulation

Chris Annin on YouTube. Open on YouTube

AR4 Robot Arm ROS2 Tutorial: MoveIt2, ros2_control, Docker, C++ Motion Planning

Chris Annin on YouTube. Open on YouTube

Ned2

Niryo's Ned2 - Product Overview by JPL

Niryo on YouTube. Open on YouTube

Ned2's Hardware Specifications

Niryo on YouTube. Open on YouTube

Bottom line

Which arm fits your needs

For value, payload, reach, precision, and repair, the AR4 is the better fit. For a plug and play classroom robot that fits on a small desk, the Ned2 is the better fit.

Final verdict: AR4 wins 7 of 12 categories

Ned2 wins 5 of 12 categories

  • PriceAR4
  • PayloadAR4
  • ReachAR4
  • RepeatabilityAR4
  • Open hardwareAR4
  • Repairability and sparesAR4
  • DIY and kitsAR4
  • Ready to useNed2
  • Classroom curriculumNed2
  • Size and weightNed2
  • Power drawNed2
  • WarrantyNed2

Best value

AR4

A complete 6-axis arm for well under half the Ned2 US price.

Real work and heavier parts

AR4

1.9 kg payload and 629 mm reach vs 0.3 kg and 490 mm.

Precision

AR4

0.25 mm published repeatability vs ±0.5 mm.

Open source and repair

AR4

Change or replace any part, firmware, or software yourself.

Plug and play classrooms

Ned2

Arrives assembled with block programming and course material.

Tight desks and low power

Ned2

7 kg, a small footprint, and 30 W max draw.

FAQ

AR4 vs Ned2 FAQ

Is the AR4 or the Ned2 better for the money?

A fully equipped AR4 is $2,227.98 in list prices (combo kit, motor package, printed parts). The Ned2 is €3,990 from Niryo before duties and taxes, and $5,714.28 at RS Americas. The AR4 also has more reach, payload, and published repeatability.

What are the AR4 and the Ned2 made of?

Both use aluminum structures. The AR4 has 26 machined aluminum structural parts with 3D printed PETG covers. Niryo lists the Ned2 materials as aluminum, ABS plastic, and steel, with injection molded ABS-PC covers over aluminum joints.

Does either arm have brakes?

The Ned2 user manual states the Ned2 has no brakes because its weight and design do not require a holding brake. Annin does not publish brake details for the AR4.

Which arm is more accurate?

Annin publishes 0.25 mm repeatability for the AR4-MK5. Niryo publishes ±0.5 mm (ISO 9283) for the Ned2. Both are maker figures, not tests run by us.

How much can each arm lift?

The AR4-MK5 is rated for 1.9 kg (4.15 lb). Niryo rates the Ned2 at 300 g.

Can I repair either arm myself?

The AR4 design is open, its parts are sold individually, and its motors and drivers are standard catalog items. Niryo does not publish a spare parts list for the Ned2. Its warranty covers repairs that may include replacing parts.

Can I use ROS and Python with both?

Yes. The AR4 has a Python HMI and ROS 2 support. Niryo provides NiryoStudio, a Python API, and a ROS stack on GitHub.

Build your own AR4.

Machined aluminum, open source from the ground up, at a price a classroom can afford.

References

Sources

Ned2 figures retrieved from niryo.com on October 25, 2026. An earlier version of the Ned2 user manual lists a 440 mm reach. We use the current Niryo specifications PDF (490 mm). Ned2 photos are from niryo.com. Niryo and Ned2 are trademarks of Niryo. This page is not affiliated with or endorsed by Niryo.