Compare

SO-101 Alternative: AR4 vs the LeRobot Arm

The SO-101 is the low cost arm built for Hugging Face LeRobot, and it is a great way to start with imitation learning. When projects outgrow a 500 g payload and hobby servos, the AR4 is a step up: six full axes plus a gripper, a 1.9 kg payload, 0.25 mm repeatability and ROS 2 drivers, on a machined aluminum frame.

Annin Robotics AR4-MK5 six-axis aluminum robot arm
Annin AR4-MK5 Image: Annin Robotics

SO-101 (LeRobot arm)

by TheRobotStudio and Hugging Face. See the maker's page in Sources for photos.

$0

AR4 combo kit with motors

$0

SO-101 follower arm parts, about (US BOM)

0.0 kg

AR4 payload (SO-101: 500 g)

0.00 mm

AR4 repeatability (SO-101: ±1–2 mm)

Overview

AR4 or SO-101: how they compare

Many people meet robot learning through the SO-101, the low cost leader and follower arm designed by TheRobotStudio with Hugging Face. It is printed, driven by small serial bus servos, and made to collect demonstrations cheaply.

The AR4 sits one size up. It is a machined aluminum arm with stepper motors, six axes and a 1.9 kg payload, so it can carry a real gripper, a camera and the objects you want to move. Below are the published figures for both, with sources.

Specs

AR4 vs SO-101 specs table

The AR4 wins 4 rows and the SO-101 wins 2. AR4 values are from the AR4-MK5 specification sheet. SO-101 values are from TheRobotStudio and Hugging Face's own pages, listed under Sources. "Not published" means the maker does not list it.

Annin AR4-MK5 and SO-101 (LeRobot arm) specifications side by side
SpecAnnin AR4-MK5SO-101 (LeRobot arm)
AxesAR4A full six axis wrist6 axes, plus a gripper on its own controller5 joints plus a gripper (6 servos per arm)
Reach629 mm (24.75 in)Not published
PayloadAR4Nearly 4 times the payload1.9 kg (4.15 lb)500 g (Seeed Studio)
RepeatabilityAR4Tighter published repeatability0.25 mm±1–2 mm (Seeed Studio)
DrivesClosed loop stepper motors with gearboxes, encoder feedback on every jointFeetech STS3215 serial bus servos, 1/345 gearing on the follower
StructureAR426 machined aluminum structural parts, 3D printed PETG covers3D printed PLA+ parts
ControlTeensy 4.1 over USB, Arduino Nano or Mega for gripper and I/OPC over USB through a servo control board
SoftwarePython HMI with digital twin, ROS 2, Modbus, G-codeHugging Face LeRobot (Python): teleoperation, datasets, policy training
Leader arm for teleoperationSO-101Not included. Jog from the HMI, an Xbox controller or ROS 2.Leader and follower pair is the standard setup
Open sourceEvenMechanical design, electronics, firmware, and software are all openOpen hardware (Apache 2.0) and open LeRobot software
PriceSO-101Far lower costCombo kit $1,229 plus $699 motor package ($1,928 total)About $122 in US parts for one follower arm, $230 with a leader arm. Printed parts extra.

AR4 advantages

Where the AR4 is stronger

AR4 advantage

Payload

1.9 kg vs 500 g, enough for heavier grippers, cameras and real objects.

AR4 advantage

Repeatability

0.25 mm vs ±1–2 mm published.

AR4 advantage

Six axis wrist

Six arm axes plus a gripper, vs five joints plus a gripper.

AR4 advantage

ROS 2 and industrial I/O

ROS 2 drivers with MoveIt, plus Modbus and G-code.

SO-101 advantages

Where the SO-101 is stronger

SO-101 advantage

Price

About $122 in parts for a follower arm vs $1,928 for a complete AR4.

SO-101 advantage

LeRobot built in

Designed for LeRobot, with leader arm teleoperation and training recipes ready to go.

SO-101 advantage

Small and light

Prints on a common desktop printer and clamps to any table.

Price

AR4 vs SO-101 price

The SO-101 bill of materials on TheRobotStudio GitHub totals $121.94 in US parts for one follower arm and $229.88 for a leader and follower pair, before printed parts (checked October 30, 2026). Seeed Studio puts the SO-101 at around $300. It costs far less than the AR4, and we say so plainly.

A complete AR4-MK5 is $1,928: the $1,229 combo kit plus the $699 motor package. The extra money buys an aluminum arm with a 1.9 kg payload, closed loop steppers with encoders, and a six axis wrist.

See the AR4 MK5 combo kit or browse all AR4 robot kits, including the aluminum, hardware, and electrical kits sold separately.

Prices change. Check each store before you buy.

List prices on anninrobotics.com and the maker's official store, October 2026

Software

Software and openness

The SO-101 was designed with Hugging Face for the LeRobot library, so recording demonstrations with a leader arm, training policies such as ACT or SmolVLA, and running them on the follower all work out of the box. That ecosystem is its biggest strength.

The AR4 is not listed as a supported robot in LeRobot today. It runs a free Python HMI with a digital twin, open source ROS 2 drivers with MoveIt and Gazebo, Modbus and G-code, and its firmware and Python API are open. Learning pipelines that talk to ROS 2 or Python can drive it, but you write that bridge yourself.

Build and repair

Build quality and repair: AR4 vs SO-101

The SO-101 follower uses six Feetech STS3215 servos on printed PLA+ parts. It is quick to print and assemble, and cheap to replace.

The AR4 uses 26 machined aluminum structural parts, belts, bearings and closed loop stepper motors. The free build manual covers each joint, the wiring and the startup procedure, and every part is sold separately.

Read the full AR4-MK5 specifications for motors, gear ratios, and joint ranges.

Bottom line

Who should choose which

Choose the AR4 if

  • Your tasks need more than 500 g of payload or tighter repeatability.
  • You want a metal, six axis arm that works with ROS 2 and MoveIt.
  • You are comfortable bridging your learning code to ROS 2 or Python yourself.

Choose the SO-101 if

  • You want the lowest cost way into imitation learning.
  • You want LeRobot support and leader arm teleoperation with no extra work.
  • Light objects under 500 g are enough.

FAQ

AR4 vs SO-101 FAQ

Is the AR4 a good SO-101 alternative?

It is a step up rather than a like for like swap. The AR4 has six axes plus a gripper, a 1.9 kg payload and 0.25 mm repeatability. The SO-101 has five joints plus a gripper, a 500 g payload and ±1–2 mm repeatability, at a much lower price.

Does the AR4 work with LeRobot?

The AR4 is not listed as a supported robot in LeRobot. It has open source ROS 2 drivers, a Python HMI and API, Modbus and G-code, so you can connect learning code through ROS 2 or Python yourself.

How much does the SO-101 cost compared to the AR4?

TheRobotStudio's US bill of materials is $121.94 for one follower arm and $229.88 for a leader and follower pair, before printed parts. A complete AR4-MK5 kit with motors is $1,928.

What is the payload of the SO-101 vs the AR4?

Seeed Studio lists 500 g for the SO-101. The AR4 is rated for 1.9 kg (4.15 lb).

Is the SO-101 a 6 DOF arm?

Seeed Studio lists it as 5 degrees of freedom plus a gripper, with six servos per arm. The AR4 has six axes, and its gripper is driven separately.

Build your own AR4.

Machined aluminum, open source from the ground up, at a price a classroom can afford.

References

Sources

SO-101 figures retrieved from github.com/TheRobotStudio, huggingface.co and seeedstudio.com on October 30, 2026. LeRobot and Hugging Face are trademarks of Hugging Face. This page is not affiliated with or endorsed by Hugging Face, TheRobotStudio or Seeed Studio.