Compare

AR4 vs Thor: Open Source DIY Robot Arm Comparison

Thor and the AR4 are two of the best known open source six axis arms you build yourself. Thor is a fully 3D printed project you source part by part for very little money. The AR4 is a machined aluminum arm sold as a kit, with closed loop joints and more than twice the payload.

Annin Robotics AR4-MK5 six-axis aluminum robot arm
Annin AR4-MK5 Image: Annin Robotics

Thor open source robot arm

by AngelLM (Thor project). See the maker's page in Sources for photos.

$0

AR4 combo kit with motors

€0

Thor hardware cost, under (per the project)

0 g

Thor max payload incl. tool

0.0 kg

AR4 payload

Overview

AR4 or Thor: how they compare

Anyone searching for an open source robot arm to build will find Thor and the AR4 within minutes of each other. Both have six axes in the same layout used by industrial robots, both are fully open, and both are popular in schools and maker communities.

The real choice is between printing everything yourself and building from a machined kit. Thor is a remarkable free design you source and print part by part. The AR4 is a commercial kit with aluminum structure, closed loop joints, and support. The comparison below uses the Thor project's own documentation and our spec sheet.

Specs

AR4 vs Thor specs table

The AR4 wins 5 rows and the Thor wins 1. AR4 values are from the AR4-MK5 specification sheet. Thor values are from AngelLM (Thor project)'s own pages, listed under Sources. "Not published" means the maker does not list it.

Annin AR4-MK5 and Thor open source robot arm specifications side by side
SpecAnnin AR4-MK5Thor open source robot arm
AxesEven66 (yaw roll roll yaw roll yaw)
Reach629 mm (24.75 in)Not published. 625 mm tall fully stretched.
PayloadAR4More than twice the payload1.9 kg (4.15 lb)750 g max, including the tool
Repeatability0.25 mmNot published
StructureAR4Machined aluminum structure26 machined aluminum structural parts, 3D printed PETG covers3D printed (3 to 4 kg of PLA or PETG), printed gears
Position feedbackAR4Closed loop encoders on every jointOpen loop steppers on A4988 drivers, with endstops (per the BOM)
Build effortAR4Kit with machined parts, full build manual and videosAbout 200 h of printing plus about 10 h of assembly, per the project FAQ
SoftwareEvenPython HMI with digital twin, ROS 2, Modbus, G-codeG-code on GRBL or RRF firmware, ROS 2 via Docker
Open sourceEvenMechanical design, electronics, firmware, and software are all openAll files open under CC BY-SA 4.0
PriceThorFar cheaper if you have a printerCombo kit $1,229 plus $699 motor package ($1,928 total)Hardware cost below €350, sourced part by part
BuyingAR4Sold as kits, with every part sold separatelyNot sold. You source and print every part.

AR4 advantages

Where the AR4 is stronger

AR4 advantage

Payload

1.9 kg rated vs 750 g including the tool.

AR4 advantage

Aluminum structure

Machined aluminum vs printed plastic and printed gears.

AR4 advantage

Closed loop joints

Encoders on every joint vs open loop steppers with endstops.

AR4 advantage

Buy it as a kit

No 200 hours of printing. Every part is also sold on its own.

Thor advantages

Where the Thor is stronger

Thor advantage

Cost

Hardware below €350 if you print it yourself, vs $1,928 for the AR4 kit.

Thor advantage

Printable anywhere

A 200 by 200 mm printer is enough, per the project.

Thor advantage

Share alike license

CC BY-SA 4.0 keeps every derivative open.

Price

AR4 vs Thor price

Thor is not sold. The project says the hardware costs below €350, which assumes you print around 3 to 4 kg of filament yourself and buy motors, drivers, and bearings from the bill of materials. That is far cheaper than the AR4, and we say so plainly.

A complete AR4-MK5 is $1,928, the $1,229 combo kit plus the $699 motor package. That buys machined aluminum parts, closed loop stepper motors, and electronics, all matched and shipped together. For a school or lab, one order replaces weeks of printing and sourcing.

See the AR4 MK5 combo kit or browse all AR4 robot kits, including the aluminum, hardware, and electrical kits sold separately.

Prices change. Check each store before you buy.

List prices on anninrobotics.com and the maker's official store, October 2026

Software

Software and openness

Thor moves with G-code on GRBL or RepRapFirmware, the same language as 3D printers and CNC machines, and has a ROS 2 setup in Docker. Every file is open under CC BY-SA 4.0.

The AR4 is open source too, and ships with a free Python HMI that includes a digital twin, plus ROS 2, Modbus, and G-code. The difference is less about openness and more about the hardware the software drives.

Build and repair

Build quality and repair: AR4 vs Thor

Thor's structure, gears, and housings are printed, with around 3 to 4 kg of filament, and its bill of materials uses A4988 stepper drivers with endstops. That keeps cost low, but printed gears and open loop motors limit stiffness and how well the arm knows its own position.

The AR4 uses 26 machined aluminum structural parts and closed loop stepper motors with encoders, so missed steps are detected and corrected. Every part is sold separately, so repairs do not depend on your printer or on sourcing parts from many shops.

Read the full AR4-MK5 specifications for motors, gear ratios, and joint ranges.

Bottom line

Who should choose which

Choose the AR4 if

  • You want a rigid, aluminum arm that handles real tools.
  • You want closed loop joints and published repeatability.
  • You want a kit you can build in weeks, not months.

Choose the Thor if

  • Your budget is the main limit and you own a 3D printer.
  • You enjoy sourcing and printing every part.
  • Light payloads under 750 g are enough.

FAQ

AR4 vs Thor FAQ

Is the Thor robot arm cheaper than the AR4?

Yes. The Thor project lists a hardware cost below €350 when you print and source the parts yourself. A complete AR4-MK5 kit is $1,928.

How much can Thor lift compared to the AR4?

Thor has lifted 750 g including the tool, per its FAQ. The AR4 is rated for 1.9 kg.

Are Thor and the AR4 both open source?

Yes. Thor publishes all files under CC BY-SA 4.0. The AR4 publishes its mechanical design, electronics, firmware, and software.

How long does each take to build?

The Thor FAQ estimates around 200 hours of printing and about 10 hours of assembly. The AR4 kit ships with machined parts, so no structural printing is needed.

Which is better for education?

For a low cost print and build project, Thor. For a classroom arm that survives student use, carries real grippers, and comes as one kit, the AR4.

Build your own AR4.

Machined aluminum, open source from the ground up, at a price a classroom can afford.

References

Sources

Thor figures retrieved from github.com/AngelLM/Thor and thor.angel-lm.com on October 26, 2026. Thor is an open source project by Ángel L.M. This page is not affiliated with or endorsed by the Thor project.