Compare

AR4 vs uFactory Lite 6: Robot Arm Comparison

Both are 6-axis desktop arms priced for labs and classrooms. The AR4 reaches 189 mm farther, lifts more than three times the payload, and publishes tighter repeatability, for about $1,100 less. The Lite 6 is a finished cobot that is far faster, lighter, and ready to run out of the box.

Annin Robotics AR4-MK5 six-axis aluminum robot arm
Annin AR4-MK5 Image: Annin Robotics

uFactory Lite 6

by UFACTORY. See the maker's page in Sources for photos.

$0

AR4 combo kit with motors

$0

Lite 6 list price (Oct 2026)

0 mm

AR4 reach (Lite 6: 440 mm)

0.0 kg

AR4 payload (Lite 6: 600 g)

Overview

AR4 or Lite 6: how they compare

Buyers usually look at these two when they want a real six axis arm on a bench without paying industrial cobot prices. Both run ROS, both fit on a lab table, and both are used in universities, makerspaces, and small automation projects.

The difference is philosophy. The Lite 6 is a sealed, finished product tuned for speed and convenience. The AR4 is an open machine you assemble, understand, and extend, with more reach and payload for the money. The sections below walk through the numbers from each maker's own pages.

Specs

AR4 vs Lite 6 specs table

The AR4 wins 5 rows and the Lite 6 wins 4. AR4 values are from the AR4-MK5 specification sheet. Lite 6 values are from UFACTORY's own pages, listed under Sources. "Not published" means the maker does not list it.

Annin AR4-MK5 and uFactory Lite 6 specifications side by side
SpecAnnin AR4-MK5uFactory Lite 6
AxesEven66
ReachAR4189 mm more reach629 mm (24.75 in)440 mm
PayloadAR4More than 3 times the payload1.9 kg (4.15 lb)600 g
RepeatabilityAR4Tighter published repeatability0.25 mm±0.5 mm
Max speedLite 6Five times the published linear speedMax linear speed: 100 mm/s500 mm/s, 180°/s joints
Arm weightLite 612.25 kg (27 lb)8 kg
MotorsClosed loop stepper motors with gearboxes, encoder feedback on every jointDC brushless, built in control box
SoftwareEvenPython HMI with digital twin, ROS 2, Modbus, G-codeUFACTORY Studio (browser), Python and C++ SDK, ROS and ROS 2, Modbus TCP
Open sourceAR4The whole robot is openMechanical design, electronics, firmware, and software are all openSDK is open source. Hardware is not.
PriceAR4About $1,100 lessCombo kit $1,229 plus $699 motor package ($1,928 total)US$2,999 list (Oct 2026)
AssemblyLite 6You build it from a kitShips assembled, plug and play
WarrantyLite 6Not published1 year

AR4 advantages

Where the AR4 is stronger

AR4 advantage

Reach

629 mm vs 440 mm. Room to tend a machine or work a larger table.

AR4 advantage

Payload

1.9 kg rated vs 600 g, enough for heavier grippers and cameras.

AR4 advantage

Published repeatability

0.25 mm vs ±0.5 mm on the makers' own spec pages.

AR4 advantage

Price

$1,928 for a complete kit vs US$2,999.

AR4 advantage

Open hardware

CAD, wiring, and firmware are all open. Repairs use standard parts.

Lite 6 advantages

Where the Lite 6 is stronger

Lite 6 advantage

Speed

500 mm/s published linear speed vs the AR4's 100 mm/s. For fast cycle work the Lite 6 is the better tool.

Lite 6 advantage

Ships assembled

Unbox, calibrate, and run. No build time.

Lite 6 advantage

Lighter, with a warranty

8 kg with the controller built in, and a 1 year warranty.

Price

AR4 vs Lite 6 price

UFACTORY lists the Lite 6 at US$2,999 on its official product page (checked October 2026). That buys an assembled arm with its controller built in. Grippers are extra.

The AR4-MK5 combo kit is $1,229 on anninrobotics.com, and the StepperOnline motor package is $699, so a complete AR4 is $1,928 before printed covers. You can print the covers yourself from the free STL files or buy a printed set. That is roughly $1,100 less than a Lite 6, for an arm with more reach and payload.

The trade is your time. A Lite 6 runs the day it arrives. An AR4 takes a build, usually a few weekends, and that build is also a lesson in how a robot arm works.

See the AR4 MK5 combo kit or browse all AR4 robot kits, including the aluminum, hardware, and electrical kits sold separately.

Prices change. Check each store before you buy.

List prices on anninrobotics.com and the maker's official store, October 2026

Software

Software and openness

The Lite 6 runs UFACTORY Studio from its control box, so any browser can drive it, with an open source Python and C++ SDK and ROS packages on top. It is a polished, well supported stack.

The AR4 ships with a free Python HMI that includes a digital twin, plus ROS 2 support, Modbus, and G-code. Firmware and electronics are open too, so you can change behavior at any level, not only through an API.

Build and repair

Build quality and repair: AR4 vs Lite 6

The AR4 is built from 26 machined aluminum parts, closed loop stepper motors, and off the shelf bearings and drivers. If a joint wears or a motor fails, you order that one part and swap it with hand tools, guided by the build manual and videos.

The Lite 6 is serviced through UFACTORY and its 1 year warranty. That is a real advantage if you want a vendor to own repairs. If you would rather own repairs yourself, or keep a fleet of classroom arms running on a small budget, the AR4's standard parts are easier to stock.

Read the full AR4-MK5 specifications for motors, gear ratios, and joint ranges.

Bottom line

Who should choose which

Choose the AR4 if

  • You want more reach and payload for less money.
  • You want to learn by building, or repair and modify the arm yourself.
  • You teach robotics and want students to see every part.

Choose the Lite 6 if

  • You need speed for repetitive tasks like touchscreen testing.
  • You want an assembled arm with vendor support and a warranty.
  • You will not need more than 600 g of payload.

FAQ

AR4 vs Lite 6 FAQ

Is the AR4 cheaper than the uFactory Lite 6?

Yes. A complete AR4-MK5 kit with motors is $1,928. UFACTORY lists the Lite 6 at US$2,999 (October 2026).

Which has more payload and reach, the AR4 or the Lite 6?

The AR4. It is rated for 1.9 kg and 629 mm of reach. The Lite 6 is rated for 600 g and 440 mm.

Is the Lite 6 faster than the AR4?

Yes. UFACTORY publishes 500 mm/s for the Lite 6. The AR4 max linear speed is 100 mm/s.

Are the AR4 and Lite 6 open source?

The AR4 is open source end to end: mechanical design, electronics, firmware, and software. The Lite 6 has an open source SDK, but the hardware is not open.

Which is better for education, the AR4 or the Lite 6?

For teaching how robots are built and controlled, the AR4, because students assemble and wire it themselves. For a class that only needs to program an arm, the assembled Lite 6 saves setup time.

Build your own AR4.

Machined aluminum, open source from the ground up, at a price a classroom can afford.

References

Sources

Lite 6 figures and price retrieved from ufactory.cc on October 26, 2026. UFACTORY and Lite 6 are trademarks of UFACTORY. This page is not affiliated with or endorsed by UFACTORY.