J2 tension Ring screws

My apologies for this issue, I will review this with my machinist. do you have a M3 bottom tap - can you tell me if the threads are not fully cut or if the hole depth is not deep enough. If the screws need to be shortened a little this is not an issue.

Don't worry. Not a bad issue. M3x8 screws work fine.

Thank you, I contacted my machinist yesterday and he is looking at these parts, he's in the middle of making another batch now. Thanks again and keep me posted if you have any other questions.

I had the same issue Chris. I used a small internal star washer to take up the difference. Problem gone.