AR4 MK3 in Finland

Hi all,

brief update. I have done work on the ROS2 solution to include a linear track, Pilz Motion Planner and velocity control (instead of the original position control) for a huge increase in speed while maintaining tolerances, among many other things.

I replaced some of the limit switches with optical switches, added a voltage and amperage display and incorporated a panic button in the code.

I'm using PlotJuggler in testing to validate the velocities, positions and accelerations, it's very helpful.

Great job! Can you provide more detail on the optical switches used and what parts you needed to change?

Hi, here's a few pictures of the limit switches on linear track and J2.

Looking great!

No changes necessary, as long as the switches give the same output as the original - some work in reverse.

Jann,

Thanks for posting pictures. Was there any code or electronics changes needed for the optical switches?

For anyone interested, here's what the newest velocity control implementation might look like in practice. It allows for over 10 times faster acceleration amd velocity than the original position based control, while maintaining smaller position and goal errors.

@yifeicheng is merging these new changes into his solution, see

https://anninrobotics.com/community/general-discussion/ros-2-driver-for-ar4-now-available

(Original trajectory and goal limits are 0.02)