Updating Covers for AR3

I have all 6 axis now working and homing and moving but the wires go through the tunnels making service a bit of a pain. For the J2 Arm the cover over the belt was easy as the new J2 ARM Cover Spacer had the same hole locations as the AR3 J2 Side Cover.
However, the changes to an internal limit switch for the J5 section means the holes have moved and the AR3 cover no longer fit. Converting the STL into a STEP file created a drawing over 46MB in size so that wasn't an option.
So instead I printed the AR4-MK3 Side and with calipers and a lot of tries (forgetting holes or moving them in the wrong direction) I finally accomplished a new J5 Side Cover and Logo.
The font for the AR3 text is close but a bit wider. And I couldn't create the recess so it was a smooth fit. Had to do a bit of filing on the letters.