Compare

AR4 vs Hiwonder xArm 1S: Robot Arm Comparison

The Hiwonder xArm 1S is a small aluminum bracket arm on serial bus servos, priced for first projects and younger students. The AR4 is a much larger six axis arm with stepper motors, encoders and industrial interfaces. They suit different stages, and this page shows where each one fits.

Annin Robotics AR4-MK5 six-axis aluminum robot arm
Annin AR4-MK5 Image: Annin Robotics

Hiwonder xArm 1S

by Hiwonder. See the maker's page in Sources for photos.

$0

AR4 combo kit with motors

$0.00

xArm 1S unassembled (Nov 2026)

0

AR4 arm joints (xArm 1S: 5 + gripper)

0.0 kg

AR4 rated payload (xArm 1S: not published)

Overview

AR4 or xArm 1S: how they compare

Do not confuse the Hiwonder xArm with the UFACTORY xArm 6, a different, larger arm. For that one see AR4 vs xArm 6. The Hiwonder xArm 1S is a desktop servo arm for gripping and sorting demos, project builds and robotics education.

The AR4 is the next step up: an industrial style six axis arm with an aluminum structure, closed loop steppers and the interfaces used in automation. Below are the published figures for both, with sources.

Specs

AR4 vs xArm 1S specs table

The AR4 wins 2 rows and the xArm 1S wins 1. AR4 values are from the AR4-MK5 specification sheet. xArm 1S values are from Hiwonder's own pages, listed under Sources. "Not published" means the maker does not list it.

Annin AR4-MK5 and Hiwonder xArm 1S specifications side by side
SpecAnnin AR4-MK5Hiwonder xArm 1S
AxesAR4A full six joint arm6 arm joints, gripper driven separately6DOF listed as 5DOF plus gripper
Reach629 mm (24.75 in)Not published
Payload1.9 kg (4.15 lb)Not published
Repeatability0.25 mmNot published
DrivesClosed loop stepper motors with gearboxes, encoder feedback on every jointLX-15D and LX-225 serial bus servos with position and voltage feedback
Structure26 machined aluminum structural parts, 3D printed PETG coversAluminum alloy brackets, 154 × 140 × 426 mm, about 0.9 kg
Power24 VDC, 198 W max7.5 V 6 A DC adapter
Control and softwarePython HMI with digital twin, ROS 2, Modbus, G-codePC software, phone app, wireless handle and mouse; action group programming; Arduino expansion; Bluetooth and USB
Open sourceAR4Mechanical design, electronics, firmware, and software are all openCourse materials include the controller's source code; hardware is not open
PricexArm 1SA fraction of the costCombo kit $1,229 plus $699 motor package ($1,928 total)From $199.99 unassembled (Nov 2026)

AR4 advantages

Where the AR4 is stronger

AR4 advantage

Six arm joints

Six joints plus a separate gripper, vs five joints plus a gripper.

AR4 advantage

Published performance

1.9 kg payload, 629 mm reach and 0.25 mm repeatability. Hiwonder does not publish these for the xArm 1S.

AR4 advantage

Industrial software and I/O

Linear and arc moves, ROS 2 with MoveIt, Modbus to a PLC, G-code and vision.

AR4 advantage

Open design

Open firmware and HMI, published manual and print files.

xArm 1S advantages

Where the xArm 1S is stronger

xArm 1S advantage

Price

From $199.99 vs $1,928 for a complete AR4.

xArm 1S advantage

Small and light

About 0.9 kg, powered from a 7.5 V adapter.

xArm 1S advantage

Easy first programming

Teach by hand, phone app and game controller control suit younger students.

Price

AR4 vs xArm 1S price

Hiwonder lists the xArm 1S from $199.99 unassembled on its official store (checked November 9, 2026), with assembled and synchronization controller options. That is far less than the AR4, and for a first arm it is a real advantage.

A complete AR4-MK5 is $1,928: the $1,229 combo kit plus the $699 StepperOnline motor package. The extra cost buys a far larger arm with stepper motors, encoders on every joint, a rated 1.9 kg payload and 0.25 mm repeatability.

See the AR4 MK5 combo kit or browse all AR4 robot kits, including the aluminum, hardware, and electrical kits sold separately.

Prices change. Check each store before you buy.

List prices on anninrobotics.com and the maker's official store, October 2026

Software

Software and openness

The xArm 1S is programmed by moving it by hand and recording action groups, by dragging sliders in Hiwonder's PC software or with its phone app, and it can be driven by a wireless handle or mouse. Hiwonder supports Arduino expansion, and its replies on the product page say secondary development uses a serial protocol.

The AR4 runs the free AR4 HMI with joint, Cartesian and tool frame jogging, linear, arc and circle moves and a virtual robot, plus a Python API, ROS 2 drivers with MoveIt, Modbus and G-code.

Build and repair

Build quality and repair: AR4 vs xArm 1S

The xArm 1S is sold unassembled or assembled. It uses six bus servos on aluminum alloy brackets and a clutch servo in the gripper to protect it from stalling.

The AR4 is a kit of 26 machined aluminum structural parts, belts, bearings and stepper motors, with a free build manual and every part sold separately.

Read the full AR4-MK5 specifications for motors, gear ratios, and joint ranges.

Bottom line

Who should choose which

Choose the AR4 if

  • You need real payload, reach and repeatability figures.
  • You are teaching industrial robot programming, ROS 2 or PLC integration.
  • You want students to build and maintain the arm.

Choose the xArm 1S if

  • You want a low cost first arm for demos and younger students.
  • Light gripping and sorting tasks are enough.
  • You prefer app and hand teaching over a desktop HMI.

FAQ

AR4 vs xArm 1S FAQ

Is the Hiwonder xArm 1S a 6 axis robot arm?

Hiwonder lists it as 6DOF, counted as five arm joints plus a gripper. The AR4 has six arm joints, and its gripper is driven separately.

How much does the xArm 1S cost compared to the AR4?

Hiwonder lists the xArm 1S from $199.99 unassembled (November 2026). A complete AR4-MK5 kit with motors is $1,928.

What is the payload of the Hiwonder xArm 1S?

Hiwonder does not publish a payload or reach figure for the xArm 1S. The AR4 is rated for 1.9 kg with 629 mm of reach.

Is the Hiwonder xArm the same as the UFACTORY xArm?

No. They are different arms from different companies. See AR4 vs xArm 6 for the UFACTORY arm.

Can the AR4 be programmed like the xArm 1S, by hand?

The AR4 is taught by jogging in the HMI, an Xbox controller or ROS 2 and saving positions, rather than by moving the arm by hand.

Build your own AR4.

Machined aluminum, open source from the ground up, at a price a classroom can afford.

Guides

Related guides

References

Sources

xArm 1S figures and price retrieved from hiwonder.com on November 9, 2026. Hiwonder and xArm 1S are trademarks of their owner. This page is not affiliated with or endorsed by Hiwonder.