3D printing guide

3D Printing AR4 Parts and End Effectors

The AR4-MK5 arm is machined aluminum. What you print are the covers, spacers and the fingers on the end of the wrist. You can print the published STLs or buy a finished set.

Gray PETG cover and spacer set for the AR4-MK5

Covers, not the skeleton

STL files for the MK5 are free. Finished PETG sets, clear covers and mirror panels are sold by C.I. Printing and linked from the shop. The arm they bolt onto is the AR4-MK5 6 axis robot arm kit.

Structure

Machined aluminum

Covers

PETG STL

Sold sets

$319.99

Clear panels

$34.99

What is printed on an AR4-MK5

The combo kit's note is direct: covers are 3D printed, and the structural kit is 26 machined aluminum pieces. Printed parts are the covers and spacers that close the arm, plus optional gripper fingers.

  • PETG cover and spacer sets, sold by color.
  • Two clear acrylic side panels, so the belts and wiring stay visible.
  • Two mirror polycarbonate side panels.
  • Gripper fingers and housings, which are not in the servo gripper parts kit.

Print the files yourself

  1. Step 1Download the STLsThe AR4-MK5 print files zip is on the downloads page, with older marks listed separately.
  2. Step 2Match the sold sets if you want the same buildC.I. Printing's PETG sets use 5 perimeters and 25% infill on the structural printed parts. That is how the sold sets are made, not a setting the STL file enforces.
  3. Step 3Print gripper parts from the servo packThe servo gripper CAD and print files zip is also on the downloads page. The servo parts kit does not include those prints.
  4. Step 4Design a new fingerStart from the CAD guide if you need the arm assembly, not just a cover STL.

Buy a printed set

The printed parts announcement points builders without a printer to C.I. Printing, set up as a direct service with no markup from Annin Robotics. The shop links the same parts from robot kits.

Those products are made and shipped by C.I. Printing, not stocked by Annin Robotics. Other colors still have product pages; the shop swatches list the colors C.I. Printing currently sells.

End effectors from the community

The open-source 3D printed underactuated robotic gripper thread is a builder adapting a published finger design so the fingers wrap the part, and checking whether it can be modified to fit the AR4. It is a design discussion, not an Annin kit.

For a supported gripper, use the servo or pneumatic kit and print only the fingers the manual leaves to you. Keep the gripper and the part inside the 1.9 kg payload. The arm's published repeatability is ±0.25 mm.

The arm

AR4-MK5 6 axis robot arm kit

Print or buy the covers, then bolt them to the combo kit. Motors, grippers and printed sets are separate. Browse them on robot kits.

FAQ

Are the AR4's aluminum parts 3D printed?

No. The MK5 structure is machined aluminum. The printed parts are the PETG covers and spacers, plus gripper fingers and housings you design or download.

Can I print the covers myself?

Yes. The MK5 STL files are free on the downloads page. C.I. Printing also sells finished PETG sets. Annin Robotics does not stock those prints.

How are the sold printed sets made?

The product page describes a complete PETG cover and spacer set, with structural parts printed at 5 perimeters and 25% infill. Clear and mirror side panels are acrylic and polycarbonate, not PETG.

Does the servo gripper kit include printed fingers?

No. The servo kit is the servo, Arduino Nano, breakout board, current sensor, power supply, cables and hardware. Print the fingers from the free servo gripper CAD, or design your own.