Research

A Robot Arm for AI Research

The AR4 is a 6 axis arm with open firmware, ROS 2 drivers and simulation, so your lab owns the whole stack from motor to model.

AR4 robot arm model in a simulation scene

Why researchers pick the AR4

Payload

1.9 kg

Reach

629 mm

Repeat.

0.25 mm

  • 1.9 kg payload, 629 mm reach and 0.25 mm repeatability.
  • Encoder feedback on every joint.
  • Open mechanical design, electronics, firmware and software.
  • Python HMI, ROS 2, Modbus and G-code control.
  • Every part sold separately, so a broken part is a quick fix.

Documented software and integrations

Each one is open source and linked to its repo. See ROS 2 for the AR4 and AR4 software for setup.

Open source

ROS 2 Jazzy driver

Annin Robotics driver for Ubuntu 24.04 with MoveIt motion planning and Gazebo simulation. Supports the servo gripper.

Annin-Robotics/ar4_ros_driver

Open source

Ekumen ar4 packages

Community ROS 2 Humble and Iron packages with Gazebo, MuJoCo and Docker. Isaac Sim support is under development.

Ekumen-OS/ar4

Open source

Hand eye calibration

Camera to arm calibration for vision based picking.

ar4_hand_eye_calibration

Open source

Driver examples

Xbox controller teleoperation and multi arm control.

ar4_ros_driver_examples

Open source

Voice guided pick and place

Grounding DINO, Segment Anything, Whisper and a RealSense D435 on a ROS 2 pipeline.

tabletop-handybot

See it run

FAQ

Does the AR4 work with ROS 2?

Yes. The Annin Robotics ar4_ros_driver supports ROS 2 Jazzy on Ubuntu 24.04 with MoveIt and Gazebo. The community Ekumen ar4 packages support Humble and Iron with Gazebo, MuJoCo and Docker.

Can I simulate the AR4 before building it?

Yes. Gazebo and MuJoCo are supported through the ROS 2 packages, Isaac Sim support is under development in the Ekumen packages, and the Python HMI has a digital twin.

Has the AR4 been used with vision and language models?

Yes. The open source tabletop-handybot project runs voice guided pick and place on an AR4 with Grounding DINO, Segment Anything, Whisper and a RealSense D435.

Can I control it from my own code?

Yes. The firmware, Python HMI and ROS 2 drivers are open source, and the arm also speaks Modbus and G-code.